Jungle Gems & Crystalites

Usage Variations & FAQs

Crystal glazes, already prone to move, will move that much more at higher temperatures. The crystals will lose some of their definition and act more as a blending agent. You'll wan to be careful about placing glaze too close to the bottom of your piece - in addition to stilting you may want to put a tile or a piece of scrap bisque beneath the piece to prevent glaze from running onto your kiln shelves.

Simply apply the crystalites in the pattern and apply as the above directions stated. Several rings of the Crystalites placed in varied patterns are also attractive. Interesting patterns may be obtained by placing several rings of crystals in a necklace-like placement around the piece. The glaze may need to be strained in order to separate the crystals for this procedure. The crystals are then applied using a brush or small spoon in a linear necklace-like ring around the piece. This can be several rings in sequential order or in a zigzag pattern to produce the most pleasing effect.

Food Safety is determined by standards established by the Food and Drug Administration (FDA). ASTM method C-738 and C-927-80 are "leach tests"; the tests involve measuring the chemical composition of an acidic food before exposure to a glazed surface and the chemical composition after a several days. If the levels of glaze materials found in the food are below the established limits, the glaze can be marketed as "Food Safe." Glazes that create dimensional surfaces also create crevices and nooks that can trap food - even after washing. This food can develop bacterial growth and cause health issues. Our policy is to discourage the use of textural glazes on ware that is intended for food usage even though the glaze has met all food safety criteria.

Yes. Foundations® Sheers would be a good choice as these glazes will allow the crystals to expand much like the base glaze of Crystalites™ and Jungle Gems™.