Thor

Manufactured by Potclay Kilns

The Thor firing system utilises burners which fire vertically upwards from the base up both side walls. Heat is therefore projected directly upwards to where it is needed without the use of deflection devices. This is more efficient and much aids more even temperature distribution. Thor kilns are solidly built of HT1 & 26 grade brick with high quality back up insulation to give 6" (150mm) thick walls mounted in a very strong angle iron and steel cabinet.

They have an arched roof and three spyholes in the door. Adjustable batts over the base flue direct combustion gases into the rear vertical flue which is fitted with a slide damper.

All kilns have four naturally aspirating burners each fitted with flame failure devices. Flame viewing-cooling ports are fitted in both side walls. At extra cost, solenoid valves and automatic temperature controllers can be fitted.

 

Kiln
No.
Capacity
Lt/cu ft
Firing Chamber
Wide Deep High
External Dimensions
Wide Deep High
Weight
Kg
Batt Size
NGK110 320 / 11.3 610 x 635 x 838mm
24 x 25 x 33"
978 x 965 x 1829mm
38.5 x 38 x 72"
780 16 x 11.5 x 1"
NGK126 357 / 12.6 660 x 648 x 838mm
26 x 25.5 x 33"
978 x 1143 x 1854mm
38.5 x 45 x 73"
820 158 x 11.5 x 1"
NGK140 402 / 14.2 711 x 686 x 838mm
28 x 27 x 33"
1016 x 1067 x 1778mm
40 x 42 x 70"
880 18 x 11 x 1"
NGK180 507 / 17.9 806 x 686 x 914mm
31.75 x 27 x 36"
1143 x 1168 x 1930mm
45 x 46 x 76"
995 21 x 11 x 1"
NGK240 674 / 23.8 813 x 914 x 914mm
32 x 36 x 36"
1156 x 1448 x 2045mm
45.5 x 57 x 80.5"
1250 21 x 11 x 1"