Pugmill 3" (75mm)

About

NB: This item is not kept in stock at Potclays and will be ordered in for you. Lead time from date of order is usually 15-20 working days, but if the manufacturer has the item in stock, the lead time could be as little as 3-4 working days.

Pugmills are an important item of equipment in any pottery or studio.  Provided that the clay is not too dry, putting it through a pugmill will reconstitute it.  Thus the clay can be reclaimed and used again.  The pugmill can also be used within reasonable limits for incorporating such materials as sand or grog etc into the clay body.  If the pugmill is used fairly frequently and the hopper and outlet nose cone sealed, when not in use, no appreciable drying of the clay will occur and it will not be necessary to clean the pugmill.  However, if the pugmill is used infrequently it should be cleaned after use. Under no circumstances should the pugmill be used with dry clay still in its body.

A larger version pugmill but with gunmetal non-rust blades and 6" (151mm) barrel with 3" (76mm) nozzle. Output 7cwts. (356kgs) per hour. 0.5 hp single phase motor operating from 220-240 volts 13-15 amp. supply or 0.75 hp 3 phase motor. Safety pack fitted.

Dimesions 51" long x 9" wide x 18" high (1300 x 230 x 450mm)
Weight 234lbs (107kgs)

We have to calculate the carriage charge for this item per order. We'll not be able to add the carriage charge to your order but will call you for it before we ship. Alternatively, please call us for a quote on +44 (0)1782 219 816 or email sales@potclays.co.uk

Collections

• Pugmills

Ask a Technical Question