Ritual Glaze Beads - Pastel Blue Bead 473

About

Shake or stir the glaze thoroughly before use. Apply to greenware or soft-fired, cone 04 stoneware bisque (1940°F / 1060°C). Use a soft fan brush to apply coats, alternating the direction of each coat (e.g., first coat horizontal, second vertical, and so on). 1–2 coats of Beads will produce a subtle crawl effect, with a more flattened texture and smaller pattern breakup.3–6 coats of Beads will create a more pronounced, dimensional beaded surface, with greater separation and texture. A heavier application will result in a more pronounced bead pattern.

Allow each coat to dry until the glossy sheen disappears before applying the next. Continue layering until hairline cracking appears. Dry time may vary depending on the clay body or bisque used. Handle with care. Overhandling may cause the glaze to flake or pop off. We recommend firing as soon as possible after application to ensure proper adhesion. Note: Darker colors may cause body staining after firing.

Fire to your preferred temperature, cone 5-10 (2167°F-2345°F/ 1186°C-1285°C). Cone 5–6 (2167°F / 1186°C to 2232°F / 1222°C): Produces a raised beaded texture with varied shapes and sizes. Cone 10 (2345°F / 1285°C): Glaze will soften and spread, potentially altering surface texture. Always test on your specific clay body. Results may vary depending on materials and firing conditions.

Collections

• Ritual Glazes by Mayco

Ask a Technical Question