Hand Building SlabMat 12 x 14

About

SlabMat for Handbuilding 12" x 14" - the perfect surface for working clay by hand.

SlabMat is the smooth alternative to canvas for rolling out slabs of clay. SlabMat is a proprietary non-woven material used instead of canvas for slab rollers, or rolling slabs with a rolling pin.

Here are tips to help you enjoy SlabMat that much more.

• When cutting clay directly on SlabMat, a wooden or dull metal fettling knife is recommended. Use care to limit the sharpness of the cutting tool and the pressure applied while cutting to avoid permanent damage to the mat.
• For the smoothest slabs, use a SlabMat on both sides of the clay slab, with the smooth side of SlabMat touching the clay.
• One long piece of SlabMat may be used for small clay slabs, folded over itself with the clay sandwiched in between. If the mat becomes creased, the crease will be permanent.
• SlabMat can be used in conjunction with other materials, like heavy weight paper or fabric, to add defined texture to one side of a clay slab, while keeping the opposite side totally smooth.
• If you encounter problems with SlabMat slipping on a slick surface, a piece of rubber shelf liner can be used underneath for added grip.
• If your clay is sticking to SlabMat, your clay may be too moist. This can be easily remedied with a light dusting of cornstarch on the mat. Cornstarch reduces sticking and will burn off in the firing.
• Do not store your clay on SlabMat after use.
• Unlike canvas, the SlabMat can be used to roll multiple slabs in one studio session before becoming too saturated and causing clay to stick.
• Prolonged wetness may cause the SlabMat to become wavy, but it can be dried between two pieces of sheetrock (drywall) to re-flatten.
• SlabMat will absorb stains from your coloured clays. We recommend a set of mats for each colour or type of clay used in your studio (white, red, porcelain, etc.)
• If you can roll your clay on canvas, you can roll your clay on SlabMat!

Cleaning Advice

To clean the slabmat you will want to use a damp (not wet) sponge or cloth. Wipe then, this should remove the clay. If you are using dark clay it is not unusual to have some staining. That should not transfer to the new clay. Many people have 2 sets, one for dark/red, one for white clays.

Once you have wiped those off you should store vertically. If you have a lot of warping (not unusual or an issue) You can just go ahead and use them like you normally would. It should not impact the slab. If you prefer you can lay them flat and weigh them down. We do not suggest using heat as the material is a plasticized paper product.

Collections

• Slabrollers
• Other Handbuilding Tools
• Rolling Pins & Guides

Ask a Technical Question