Mayco Pottery Cascades
High Fire looks at Low Fire Temperatures
Pottery Cascade™ are moving, flowing glazes, commonly used under or over other glazes to create reactions and movement. Can be applied randomly or uniformly, brushed or dabbed on with a sponge. The colored cascades – white and amber – add a tinge of color to glazes with which they are used. Use Pottery Cascade™ as a flux with Elements™ to create movement in the colors. Great visual effects are create when added under, over or in-between Elements™ or Element™ Chunkies.Cascades are perfect for the low fire designer seeking to create the looks achieved at higher temperatures. Their variability insures that no two designs will be exactly alike.
Apply 1-2 coats with a brush or sponge, under or over another glaze. You can influence the direction of the flow or create a pattern by how you apply the glazes. Allow to dry thoroughly. Fire to cones 06/05. To prevent the glaze from running off your vertical pieces do not apply Pottery Cascades to the bottom third of the piece.
- 4 oz jar
- 16 oz wide mouth pint
- Avoid applying Pottery Cascade™ on lower third of piece as glaze will move.
- PC601 Clear Cascade is the most fluid of the Cascade products, requiring care in application.
- PC602 White Cascade moves the least.
- Pottery Cascade™ are luster compatible.
Pottery Cascade™ are commonly used by low-fire designers who seek to simulate effects of higher fire glazes. With the disappearance of leaded glazes from the markets, Cascades have been used to create the flowing movement lead used to provide.
The following application recommendations are based upon the original product development intent and use for the product. Information on alternative application methods is listed in the section "Usage Variations and FAQ's".
- Shake for 5-6 seconds before use.
- Dispense glaze onto a palette (tile, plate, etc.) and apply with your brush or decorating accessory of choice (sponge, stamp, etc.).
- We advise against dipping your brush directly into the jar to avoid contamination, particularly if you are using one brush to layer Pottery Cascades over other glazes.
- We recommend that you do not apply Pottery Cascade™ to the lowest third of your piece as these glazes WILL move. Vertical pieces require more attention to this detail than horizontal pieces.
- Pottery Cascade™ glazes were designed to mature at a shelf cone 06 (999° C). Make sure the glaze has dried thoroughly prior to firing. A medium ramp/firing rate is recommended (250°F per hour).